What customer care about?
1) Direct customers, put more attention to the quality of the products and service.
2) For the wholesaler or agent, they more care about the Sustainable Intermediate interest.
KEESSON handles all your worries. Follow me to learn about why it’s the best choice for you.
|Service Life||25-30 years||10-15 years|
|Welding||ABB automatic full welding||Manual welding/mechanical welding|
|Angle Piece||Angle piece drainage patent||Ordinary corner pieces|
|Roof||Micro-arch roof||Flat Roofs|
|1.4mm THC Blind wave steel plate||0.4-0.8mm THC flat roofs|
|Fully welded||Spot welding|
|Frame Material||3.0 mm THC Q235B steel||2.5 mm THC|
|Wall Panel||75mm thick rock wool sandwich insulation board；
Bulk density: 80kg/m³
Bulk Density: 50-60kg/m³
|Window||Hollow broken bridge thermal insulation aluminum alloy windows||Ordinary window|
|Paint||Hang paint on the inside, outside, top, and bottom of the frame in all directions||Manual paint, the bottom part of the frame in contact with the ground is not painted|
|Wires||Internal wires are embedded||Exposed wires are often used|
|Accessories||Provided by LESSO (fortune 500 enterprise in the world)||Ordinary supplier|
|Paint Film||80-micron||15 microns|
Welding quality is inspected by ultrasonic inspection.
Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials.
------Detect the thickness of the product paint film
Electronic coating thickness gauges for measuring on magnetic substrate materials use the electromagnetic induction principle. A three-coil probe system is used where the central coil is powered by the instrument and the other two coils, either side of the central coil, detect the resulting magnetic field. The signal generated by the instrument is sinusoidal and therefore an alternating magnetic field is established round the central coil.
KEESSON opened an office in Thailand, Myanmar, Cambodia, and Indonesia. we can provide the Local Example viewing and install service. start a contact for an example viewing
The automated production line not only saves labor costs, reduces the waste ratio, but also greatly improves production efficiency. Compared with traditional small workshops, professional automated production lines reduce production costs in all aspects, thus providing agents with more attractive profit margins.
KEESSON is committed to providing you with the best user experience with the best products and services